Result Pages:
Proof of ID

Use this voucher as a fee for proof of ID if you want to download plans and have not made…

IOM sized Sail Set

Sail set suitable for IOM sized boats. Jib sail with pocket luff.
You can choose A -, B - or…

Sagitta - <font color="red">Chopped Hull & Deck</font> Combo

Chopped Hull & Deck to be shipped to countries where length restrictions do not allow parcel lengths over 1…

IOM Jib Stay

Adjustable Jib Stay to slide over the mast. Available for 11mm and 12.5mm masts.
Please choose the version you want.…

IOM Mast Spreader - Clipon

3D printed Mast spreader 3D printed for IOM and other boats available for rigs with mast diameter of 11mm or…

IOM Boom End

ABS 3D printed Boom Ends for 11mm booms (inner diameter 10mm).…

IOM Mast Top

IOM Mast Top with 4mm hole for mast crane. Available for 11mm and 12.5mm masts.
Please choose the version you want.…

IOM Mast Spreader - Slideon

3D printed Mast spreader 3D printed for IOM and other boats available for rigs with mast diameter of 11mm or…

IOM Jib Tack

IOM Jib Tack for 11mm booms.
Our 3D printed ABS - Jib Tack is used in connection with a swivel to…

Naga - 2m Class Trimaran -Limited Edition

Naga - 2m Trimaran Parts Set

- hull lenght 1980mm without front fender
- beam 1980mm
- epoxy-fiber glass hulls

Naga - 2m Class Trimaran -Limited Edition - chopped for shipping

Naga - 2m Trimaran Parts Set

- hull lenght 1980mm without front fender
- beam 1980mm
- epoxy-fiber glass hulls

Mako - Hull and Deck

Mako - Hull and deck set, one of our last sets from previous production - maybe some color imperfections and…

RG65 Gooseneck Kit

RG65 Gooseneck kit. The 3D printed kit fits 6mm masts and 5mm booms. All needed screws are included in the…

Mini40 Gooseneck Kit - Boom Vang

Mini40 or Marblehead ballraced Gooseneck kit with two ball bearings. The 3D printed kit fits 14mm masts. Two ball bearings…

IOM Gooseneck Kit - Boom Vang

IOM ballraced Gooseneck kit with two ball bearings. The 3D printed kit fits 12,7mm and 11mm masts with the…

DIY Sail Winch Part Set

3D printed pinion, geared pulley with 30mm diameter and base plate to fit the DIY sailwinch described …

Ninja1000 - MultiONE Catamaran - Appendages Set

Ninja1000 -MultiONE Catamaran - Appendages set consisting of Keel Fin and T-Foil Rudder.

Please contact us for a manual shipping quotation…

Ninja1000 - MultiONE Catamaran - Pre cut plywood parts

Set of pre cut plywood parts for the Ninja1000 MultiONE catamaran. Useful when building a Ninja1000 from our plans or…

Ninja1000 - MultiONE Catamaran Plans

Plans to build a Ninja 1000 MultiONE Catamaran platform for self builders.
The set includes the hull templates to build your…

FireDragon1000 - MultiONE Class Trimaran Plans

FireDragon1000 - MultiONE Class Trimaran - Self Building Plans - Hulls only…

Currencies
We Accept