Result Pages:
3mm Brass Eyelets

Bag of 50 piece of 3mm ID brass eyelets for sailmaking.

4mm Brass Eyelets

Bag of 50 piece of 4mm ID brass eyelets for sailmaking.

5mm Brass Plated Eyelets

Bag of 50 piece of 5mm ID brass plated eyelets for sailmaking.

Asymmetric V-foils for Mini40 boats

Our asymmetric V-foils generate more lift than symmetric V-foils, they can be used to lift the boat to sail on…

DIY Sail Winch Part Set

3D printed pinion, geared pulley with 30mm diameter and base plate to fit the DIY sailwinch described …

Fat Top Swing/Conventional Rig for F48 / Mini40 Multihulls

Our Fat Top Swing/Conventional Rig Kit for Mini40 Multihulls fits for all our F48 / Mini40 multihulls especially the FireDragon,…

FireDragon - Mini40 Trimaran

FireDragon - Mini40 Trimaran Kit

- hull lenght 1200mm without front fender
- beam 1220mm
- epoxy-fiber glass hulls
-…

FireDragon-1000 - MultiONE Trimaran

FireDragon-1000 - MultiOne Trimaran Kit

- hull lenght 980mm without front fender
- beam 1000mm
- epoxy-fiber glass hulls
-…

FireDragon1000 - MultiONE Class Trimaran Plans

FireDragon1000 - MultiONE Class Trimaran - Self Building Plans - Hulls only…

IOM Boom End

ABS 3D printed Boom Ends for 11mm booms (inner diameter 10mm).…

IOM Carbon Keel No. 1

Universal carbon reinforced keel which fits our Vanquish, our Terminator, Noux II, Siri, Maniac II, Laerke and other IOM yachts.…

IOM Carbon Rudder Type 1

Carbon reinforced rudder for IOM class boats. This rudder can be used for our Terminator, Maniac II and other all…

IOM Carbon Rudder Type 2

Carbon reinforced rudder for IOM class boats. This rudder can be used for our Vanquish, Noux II and all other…

IOM Fin & Mast Case

Fin case for our IOM Keel No. 1 with incorporated mast slot allowing the rig to be positioned and raked…

IOM Gooseneck Kit - Boom Vang

IOM ballraced Gooseneck kit with two ball bearings. The 3D printed kit fits 12,7mm and 11mm masts with the…

IOM Jib Stay

Adjustable Jib Stay to slide over the mast. Available for 11mm and 12.5mm masts.
Please choose the version you want.…

IOM Jib Tack

IOM Jib Tack for 11mm booms.
Our 3D printed ABS - Jib Tack is used in connection with a swivel to…

IOM Mast Spreader - Clipon

3D printed Mast spreader 3D printed for IOM and other boats available for rigs with mast diameter of 11mm or…

IOM Mast Spreader - Slideon

3D printed Mast spreader 3D printed for IOM and other boats available for rigs with mast diameter of 11mm or…

IOM Mast Top

IOM Mast Top with 4mm hole for mast crane. Available for 11mm and 12.5mm masts.
Please choose the version you want.…

Currencies